Columbus Bathroom Remodel: What a Curbless Shower Really Takes to Build Right
A curbless shower can make a bathroom feel more open and contemporary. With no raised curb at the entrance, it can also be easier to enter, simpler to clean, and a practical feature for homeowners planning to stay in their homes as their needs change.
But a curbless shower isn’t just a standard shower with the curb removed. The floor structure, slope, drain, waterproofing, and glass enclosure all have to work together to keep water moving into the drain, not out into the bathroom. For a Columbus bathroom remodel, the look may be simple; building it reliably takes careful planning and skilled installation.
Start with the floor structure and finished heights
The first question is not which tile to choose. It’s whether the shower floor can be built low enough to meet the bathroom floor without compromising the home’s structure.
In a wood-framed floor, a contractor may need to create a recessed area for the shower assembly. That means assessing the joists, subfloor, plumbing routes, and the amount of depth needed for the sloped base, waterproofing, mortar or other approved setting materials, and tile. Joists should not be cut or notched casually to make a shower fit. Structural changes need an appropriate design.
In a home with a concrete slab, lowering the shower may involve different considerations. The contractor needs to understand the slab, its reinforcement, and what plumbing or other services may be below it before any concrete is cut. Depending on the home, raising the surrounding bathroom floor or choosing another design may be more appropriate.
The key is to plan the complete assembly before work begins. The finished elevations of the bathroom floor, shower entry, drain, and tile all matter. If those measurements are treated as an afterthought, the result may have an awkward lip, an uneven transition, or too little room to create the necessary drainage slope.

Create a continuous slope toward the drain
A curbless shower still needs a defined slope so water flows toward the drain. The slope must be planned into the base and carried through the finished surface. Ohio plumbing code includes a minimum slope requirement for shower liners; the exact assembly and installation details should follow the applicable code, approved plans, and product instructions.
The floor should not have dips or low spots that hold puddles. Even a beautiful tile installation can be frustrating if water sits in a corner after every shower. A properly prepared base gives the tile setter a consistent surface and helps direct water where it belongs.
The location and type of drain affect the slope design:
A center or point drain is familiar and can suit many shower layouts. The floor generally slopes toward it from multiple directions. Smaller tiles can be helpful for accommodating those changes in slope.
A linear drain is an elongated drain, often placed along a wall or near the shower entrance. When planned for the layout, it can allow a single-plane slope and work well with larger-format tile.
Neither drain type guarantees good drainage by itself. The drain must suit the shower’s dimensions and plumbing, sit at the correct height, and connect properly to the waterproofing system. Drain capacity and placement matter, especially when the shower includes multiple outlets.
For homeowners, a good planning question is: Where is the high point of the shower floor, and how will the design keep water from flowing past the entry? The answer should be visible in the layout before installation begins.
Waterproof the shower as one connected system
Tile and grout are the visible finish, not the waterproof barrier. A dependable shower needs a continuous, compatible waterproofing system that protects the shower floor and walls and connects correctly to the drain.
That means paying attention not only to the broad surfaces but also to the details: corners, seams, wall-to-floor transitions, niches, benches, plumbing penetrations, and the drain connection. A gap or incompatible connection in one of these places can undermine the rest of the work. The selected system’s materials and installation instructions should be followed throughout; casually mixing products can create uncertainty about whether they work together.
The City of Columbus residential plan review guidance lists plumbing-plan details such as fixture locations and drain and vent tie-ins. Its plumbing inspection information explains that inspections check plumbing systems against the approved design. Permit and inspection requirements depend on the project, so homeowners should confirm what applies to their scope.
Ask your remodeler to explain the waterproofing method, how it joins to the drain, and how corners and penetrations will be handled. You can also ask how the work will be checked before tile covers it. Testing requirements vary by project and system; follow the inspector’s direction and the manufacturer’s instructions.

Plan glass and splash control, not just the opening
Removing the curb also removes a physical barrier that would otherwise help contain water. That makes the shower enclosure and the placement of shower fixtures important parts of the design.
A fixed glass panel can limit splash while keeping the entry open. The panel’s size and location should be coordinated with the showerhead, water direction, and the room layout. A hand shower or showerhead aimed toward the opening can send water onto the bathroom floor, even when the shower base is sloped correctly.
Some curbless showers use a subtle splash-control detail at the opening. For example, Schluter’s shower-system information describes profiles designed for splash control at curbless entries, as well as linear-drain options. Details vary by product and design, but the broader lesson is the same: a flush entry needs a deliberate water-management plan.
Check whether heated floors fit the plan
Heated bathroom floors can be a welcome addition to a Central Ohio home, particularly on chilly mornings. In a curbless project, heating elements need to be considered alongside the shower layout, waterproofing, and floor elevations, not added as a last-minute upgrade.
Confirm which areas can be heated and whether the selected heating system is approved for the specific floor assembly. Shower areas have special moisture and installation requirements, so heating should not be extended into the shower unless the system manufacturer explicitly allows that application and provides the required details. A qualified installer can coordinate the heating plan with the tile and waterproofing systems.
Common problems with bargain installs
The lowest price can be tempting, but a bid that skips planning or careful preparation may cost more to fix later. Watch for a scope that doesn’t clearly explain how the floor will be recessed or raised, how the slope will be formed, or how the waterproofing will connect to the drain.
Common trouble spots include:
Water escaping the shower: The opening, glass, floor high point, or showerhead placement may not have been planned to control splash.
Standing water: A poorly formed slope, an uneven substrate, or an incorrectly placed drain can leave puddles behind.
A failed waterproofing detail: Incomplete coverage, compromised seams, or a poor drain connection can allow moisture behind the tile.
These problems may be difficult to spot once the tile is installed. That’s why a detailed scope, clear communication, and attention to the hidden work are just as important as the finished appearance. A higher-quality installation is not simply about premium tile; it’s about building the full shower assembly correctly.
Questions to ask before work begins
When planning a Columbus bathroom remodel, ask your contractor:
How will the floor structure accommodate a flush shower entry?
What slope will the shower floor have, and where is its high point?
Why is the proposed drain type and location right for this layout?
What waterproofing system will be used, and how will it connect to the drain?
How will the glass and showerhead placement help manage splash?
Is heated flooring included, and where is it approved to be installed?
What permit, inspection, or testing steps apply to this project?
Clear answers help you compare the actual scope, not just the finish selections or the price.
For homeowners considering bathroom remodeling with Mankind LLC, a free at-home consultation can be scheduled around your availability. We’re a locally owned, operated, and licensed remodeling company serving Columbus and Greater Columbus, and we can discuss the details that matter for your home. Contact us to talk through your project. Financing options are available through our partnership with Synchrony, subject to applicable terms and approval; successful referrals can earn a $100 bonus.


Comments